less_retarded_wiki/3d_rendering.md
2023-04-05 21:52:44 +02:00

20 KiB

3D Rendering

In computer graphics 3D rendering is concerned with computing images that represent a projected view of 3D objects through a virtual camera.

There are many methods and algorithms for doing so differing in many aspects such as computation complexity, implementation complexity, realism of the result, representation of the 3D data, limitations of viewing and so on. If you are just interested in the realtime 3D rendering used in gaymes nowadays, you are probably interested in GPU-accelerated 3D rasterization with APIs such as OpenGL and Vulkan.

LRS has a 3D rendering library called small3dlib.

Methods

As most existing 3D "frameworks" are harmful, a LRS programmer is likely to write his own 3D rendering system that suits his program best, therefore we should list some common methods of achieving 3D. Besides that, it's just pretty interesting to see what there is in the store.

A table of some common 3D rendering methods follows, including the most simple, most advanced and some unconventional ones. Note that here we talk about methods and techniques rather than algorithms, i.e. general approaches that are often modified and combined into a specific rendering algorithm. For example the traditional triangle rasterization is sometimes combined with raytracing to add e.g. realistic reflections. The methods may also be further enriched with features such as texturing, antialiasing and so on. The table below should help you choose the base 3D rendering method for your specific program.

The methods may be tagged with the following:

  • 2.5D: primitive 3D, often called pseudo 3D or fake 3D, having significant limitations e.g. in degrees of freedom of the camera
  • off: slow method usually used for offline (non-realtime) rendering (even though they indeed may run in real time e.g. with the help of powerful GPUs)
  • IO vs OO: image order (rendering by pixels) vs object order (rendering by objects)
method notes
3D raycasting IO off, shoots rays from camera
2D raycasting IO 2.5D, e.g. Wolf3D
beamtracing IO off
billboarding OO
BSP rendering 2.5D, e.g. Doom
conetracing IO off
"dungeon crawler" OO 2.5D, e.g. Eye of the Beholder
ellipsoid rasterization OO, e.g. Ecstatica
flat-shaded 1 point perspective OO 2.5D, e.g. Skyroads
reverse raytracing (photon tracing) OO off, inefficient
image based rendering generating inbetween views
mode 7 IO 2.5D, e.g. F-Zero
parallax scrolling 2.5D, very primitive
pathtracing IO off, Monte Carlo, high realism
portal rendering 2.5D, e.g. Duke3D
prerendered view angles 2.5D, e.g. Iridion II (GBA)
raymarching IO off, e.g. with SDFs
raytracing IO off, recursive 3D raycasting
segmented road OO 2.5D, e.g. Outrun
shear warp rednering IO, volumetric
splatting OO, rendering with 2D blobs
triangle rasterization OO, traditional in GPUs
voxel space rendering OO 2.5D, e.g. Comanche
wireframe rendering OO, just lines

TODO: Rescue On Fractalus!

TODO: find out how build engine/slab6 voxel rendering worked and possibly add it here (from http://advsys.net/ken/voxlap.htm seems to be based on raycasting)

TODO: VoxelQuest has some innovative voxel rendering, check it out (https://www.voxelquest.com/news/how-does-voxel-quest-work-now-august-2015-update)

3D Rendering Basics For Nubs

If you're a complete noob and are asking what the essence of 3D is or just how to render simple 3Dish pictures for your game without needing a PhD, here's the very basics. Yes, you can use some 3D engine such as Godot that has all the 3D rendering preprogrammed, but you you'll surrender to bloat, you won't really know what's going on and your ability to tinker with the rendering or optimizing it will be basically zero... AND you'll miss on all the fun :) So here we just foreshadow some concepts you should start with if you want to program your own 3D rendering.

The absolute basic thing in 3D is probably perspective, or the concept which says that "things further away look smaller". This is basically the number one thing you need to know and with which you can make simple 3D pictures, even though there are many more effects and concepts that "make pictures look 3D" and which you can potentially study later (lighting, shadows, focus and blur, stereoscopy, parallax, visibility/obstruction etc.). { It's probably possible to make something akin "3D" even without perspective, just with orthographic projection, but that's just getting to details now. Let's just suppose we need perspective. ~drummyfish }

If you don't have rotating camera and other fancy things, perspective is actually mathematically very simple, you basically just divide the object's size by its distance from the viewer, i.e. its Z coordinate (you may divide by some multiple of Z coordinate, e.g. by 2 * Z to get different field of view) -- the further away it is, the bigger number its size gets divided by so the smaller it becomes. This "dividing by distance" ultimately applies to all distances, so in the end even the details on the object get scaled according to their individual distance, but as a first approximation you may just consider scaling objects as a whole. Just keep in mind you should only draw objects whose Z coordinate is above some threshold (usually called a near plane) so that you don't divide by 0! With this "dividing by distance" trick you can make an extremely simple "3Dish" renderer that just draws sprites on the screen and scales them according to the perspective rules (e.g. some space simulator where the sprites are balls representing planets). There is one more thing you'll need to handle: visibility, i.e. nearer objects have to cover the further away objects -- you can do this by simply sorting the objects by distance and drawing them back-to-front (painter's algorithm).

Here is some "simple" C code that demonstrates perspective and draws a basic animated wireframe cuboid as ASCII in terminal:

#include <stdio.h>

#define SCREEN_W 50       // ASCII screen width
#define SCREEN_H 22       // ASCII screen height
#define LINE_POINTS 64    // how many points for drawing a line
#define FOV 8             // affects "field of view"
#define FRAMES 30         // how many animation frames to draw

char screen[SCREEN_W * SCREEN_H];

void showScreen(void)
{
  for (int y = 0; y < SCREEN_H; ++y)
  {
    for (int x = 0; x < SCREEN_W; ++x)
      putchar(screen[y * SCREEN_W + x]);

    putchar('\n');
  }
}

void clearScreen(void)
{
  for (int i = 0; i < SCREEN_W * SCREEN_H; ++i)
    screen[i] = ' ';
}

// Draws point to 2D ASCII screen, [0,0] means center.
int drawPoint2D(int x, int y, char c) 
{
  x = SCREEN_W / 2 + x;
  y = SCREEN_H / 2 + y;

  if (x >= 0 && x < SCREEN_W && y >= 0 && y <= SCREEN_H)
    screen[y * SCREEN_W + x] = c;
}

// Divides coord. by distance taking "FOV" into account => perspective.
int perspective(int coord, int distance)
{
  return (FOV * coord) / distance;
}

void drawPoint3D(int x, int y, int z, char c)
{
  if (z <= 0)
    return; // at or beyond camera, don't draw

  drawPoint2D(perspective(x,z),perspective(y,z),c);
}

int interpolate(int a, int b, int n)
{
  return a + ((b - a) * n) / LINE_POINTS;
}

void drawLine3D(int x1, int y1, int z1, int x2, int y2, int z2, char c)
{
  for (int i = 0; i < LINE_POINTS; ++i) // draw a few points to form a line
    drawPoint3D(interpolate(x1,x2,i),interpolate(y1,y2,i),interpolate(z1,z2,i),c);
}

int main(void)
{
  int shiftX, shiftY, shiftZ;

  #define N 12  // side length
  #define C '*'

  // cuboid points:
  //      X                   Y            Z
  #define PA -2 * N + shiftX, N + shiftY,  N + shiftZ
  #define PB 2 * N + shiftX,  N + shiftY,  N + shiftZ
  #define PC 2 * N + shiftX,  N + shiftY,  2 * N + shiftZ
  #define PD -2 * N + shiftX, N + shiftY,  2 * N + shiftZ
  #define PE -2 * N + shiftX, -N + shiftY, N + shiftZ
  #define PF 2 * N + shiftX,  -N + shiftY, N + shiftZ
  #define PG 2 * N + shiftX,  -N + shiftY, 2 * N + shiftZ
  #define PH -2 * N + shiftX, -N + shiftY, 2 * N + shiftZ

  for (int i = 0; i < FRAMES; ++i) // render animation
  {
    clearScreen();

    shiftX = -N + (i * 4 * N) / FRAMES; // animate
    shiftY = -N / 3 + (i * N) / FRAMES;
    shiftZ = 0; 

    // bottom:
    drawLine3D(PA,PB,C); drawLine3D(PB,PC,C); drawLine3D(PC,PD,C); drawLine3D(PD,PA,C);

    // top:
    drawLine3D(PE,PF,C); drawLine3D(PF,PG,C); drawLine3D(PG,PH,C); drawLine3D(PH,PE,C);

    // sides:
    drawLine3D(PA,PE,C); drawLine3D(PB,PF,C); drawLine3D(PC,PG,C); drawLine3D(PD,PH,C);

    drawPoint3D(PA,'A'); drawPoint3D(PB,'B'); // corners
    drawPoint3D(PC,'C'); drawPoint3D(PD,'D');
    drawPoint3D(PE,'E'); drawPoint3D(PF,'F');
    drawPoint3D(PG,'G'); drawPoint3D(PH,'H');

    showScreen();

    puts("press key to animate");
    getchar();
  }

  return 0;
}

One frame of the animation should look like this:

                 E*******************************F
                 * *                       ***   *
                 *  **                 ***       *
                 *   H***************G*          *
                 *   *               *           *
                 *   *               *           *
                 *   *               *           *
                 *   *               *           *
                 *   *               *           *
                 *   *               *           *
                 *   D***************C           *
                 *  **                ***        *
                 *  *                    *       *
                 * *                       **    *
                 ***                         * * *
                 A*******************************B

press key to animate

Mainstream Realtime 3D

You may have come here just to learn about the typical realtime 3D rendering used in today's games because aside from research and niche areas this kind of 3D is what we normally deal with in practice. This is what this section is about.

Nowadays "game 3D" means a GPU accelerated 3D rasterization done with rendering APIs such as OpenGL, Vulkan, Direct3D or Metal (the last two being proprietary and therefore shit) and higher level engines above them, e.g. Godot, OpenSceneGraph etc. The methods seem to be evolving to some kind of rasterization/pathtracing hybrid, but rasterization is still the basis.

This mainstream rendering uses an object order approach (it blits 3D objects onto the screen rather than determining each pixel's color separately) and works on the principle of triangle rasterization, i.e. 3D models are composed of triangles (or higher polygons which are however eventually broken down into triangles) and these triangles are projected onto the screen according to the position of the virtual camera and laws of perspective. Projecting the triangles means finding the 2D screen coordinates of each of the triangle's three vertices -- once we have thee coordinates, we draw (rasterize) the triangle to the screen just as a "normal" 2D triangle (well, with some asterisks).

Furthermore things such as z-buffering (for determining correct overlap of triangles) and double buffering are used, which makes this approach very memory (RAM/VRAM) expensive -- of course mainstream computers have more than enough memory but smaller computers (e.g. embedded) may suffer and be unable to handle this kind of rendering. Thankfully it is possible to adapt and imitate this kind of rendering even on "small" computers -- even those that don't have a GPU, i.e. with pure software rendering. For this we e.g. replace z-buffering with painter's algorithm (triangle sorting), drop features like perspective correction, MIP mapping etc. (of course quality of the output will go down).

Also additionally there's a lot of bloat added in such as complex screen space shaders, pathtracing (popularly known as raytracing), megatexturing, shadow rendering, postprocessing, compute shaders etc. This may make it difficult to get into "modern" 3D rendering. Remember to keep it simple.

On PCs the whole rendering process is hardware-accelerated with a GPU (graphics card). GPU is a special hardware capable of performing many operations in parallel (as opposed to a CPU which mostly computes sequentially with low level of parallelism) -- this is ideal for graphics because we can for example perform mapping and drawing of many triangles at once, greatly increasing the speed of rendering (FPS). However this hugely increases the complexity of the whole rendering system, we have to have a special API and drivers for communication with the GPU and we have to upload data (3D models, textures, ...) to the GPU before we want to render them. Debugging gets a lot more difficult. So again, this is bloat, consider avoiding GPUs.

GPUs nowadays are no longer just focusing on graphics, but are kind of a general device that can be used for more than just 3D rendering (e.g. crypto mining, training AI etc.) and can no longer even perform 3D rendering completely by themselves -- for this they have to be programmed. I.e. if we want to use a GPU for rendering, not only do we need a GPU but also some extra code. This code is provided by "systems" such as OpenGL or Vulkan which consist of an API (an interface we use from a programming language) and the underlying implementation in a form of a driver (e.g. Mesa3D). Any such rendering system has its own architecture and details of how it works, so we have to study it a bit if we want to use it.

The important part of a system such as OpenGL is its rendering pipeline. Pipeline is the "path" through which data go through the rendering process. Each rendering system and even potentially each of its version may have a slightly different pipeline (but generally all mainstream pipelines somehow achieve rasterizing triangles, the difference is in details of how they achieve it). The pipeline consists of stages that follow one after another (e.g. the mentioned mapping of vertices and drawing of triangles constitute separate stages). A very important fact is that some (not all) of these stages are programmable with so called shaders. A shader is a program written in a special language (e.g. GLSL for OpenGL) running on the GPU that processes the data in some stage of the pipeline (therefore we distinguish different types of shaders based on at which part of the pipeline they reside). In early GPUs stages were not programmable but they became so as to give a greater flexibility -- shaders allow us to implement all kinds of effects that would otherwise be impossible.

Let's see what a typical pipeline might look like, similarly to something we might see e.g. in OpenGL. We normally simulate such a pipeline also in software renderers. Note that the details such as the coordinate system handedness and presence, order, naming or programmability of different stages will differ in any particular pipeline, this is just one possible scenario:

  1. Vertex data (e.g. 3D model space coordinates of triangle vertices of a 3D model) are taken from a vertex buffer (a GPU memory to which the data have been uploaded).
  2. Stage: vertex shader: Each vertex is processed with a vertex shader, i.e. one vertex goes into the shader and one vertex (processed) goes out. Here the shader typically maps the vertex 3D coordinates to the screen 2D coordinates (or normalized device coordinates) by:
  1. Possible optional stages that follow are tessellation and geometry processing (tessellation shaders and geometry shader). These offer possibility of advanced vertex processing (e.g. generation of extra vertices which vertex shaders are unable to do).
  2. Stage: vertex post processing: Usually not programmable (no shaders here). Here the GPU does things such as clipping (handling vertices outside the screen space), primitive assembly and perspective divide (transforming from [homogeneous coordinates](homogeneous coordinates.md) to traditional cartesian coordinates).
  3. Stage: rasterization: Usually not programmable, the GPU here turns triangles into actual pixels (or fragments), possibly applying backface culling, perspective correction and things like stencil test and depth test (even though if fragment shaders are allowed to modify depth, this may be postpones to later).
  4. Stage: pixel/fragment processing: Each pixel (fragment) produced by rasterization is processed here by a pixel/fragment shader. The shader is passed the pixel/fragment along with its coordinates, depth and possibly other attributes, and outputs a processed pixel/fragment with a specific color. Typically here we perform shading and texturing (pixel/fragment shaders can access texture data which are again stored in texture buffers on the GPU).
  5. Now the pixels are written to the output buffer which will be shown on screen. This can potentially be preceded by other operations such as depth tests, as mentioned above.

TODO: example of specific data going through the pipeline